Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
SYSTem:HPCoupling <CouplingType>
Controls the default coupling ratios in the HP emulation mode for:
●
span and resolution bandwidth (Span/RBW) and
●
resolution bandwidth and video bandwidth (RBW/VBW)
This command is only available if a HP language is selected using
on page 983.
Parameters:
<CouplingType>
Example:
Manual operation:
SYSTem:IFGain:MODE <Mode>
Configures the internal IF gain settings in HP emulation mode due to the application
needs. This setting is only taken into account for resolution bandwidth < 300 kHz and is
only available if a HP language is selected using
Parameters:
<Mode>
Example:
Manual operation:
SYSTem:LANGuage <Language>
This command selects the system language.
Example:
Manual operation:
SYSTem:PSA:WIDeband <State>
This command defines which option is returned when the *OPT? query is executed,
depending on the state of the wideband option.
Manuel d'utilisation 1179.5860.09 - 12
HP | FSP
*RST:
FSP
SYSTem:HPC HP
See
"Coupling"
on page 578
NORMal | PULSe
NORMal
Optimized for high dynamic range, overload limit is close to ref-
erence level.
PULSe
Optimized for pulsed signals, overload limit up to 10 dB above
reference level.
*RST:
NORM
SYST:IFG:MODE PULS
See
"IF Gain"
on page 577
SYST:LANG 'PSA'
Emulates the PSA.
See
"Language"
on page 577
Remote commands
Emulating other instruments' commands
SYSTem:LANGuage
SYSTem:LANGuage
on page 983.
989
989
Publicité
