Rohde & Schwarz FPL1000 Manuel D'utilisation page 559

®
R&S FPL1000
9 Network operation and remote control
In addition to working with the R&S FPL1000 interactively, located directly at the instru-
ment, it is also possible to operate and control it from a remote PC. Various methods
for remote operation are supported:
●
Connecting the instrument to a (LAN) network
●
Using the web browser interface in a LAN network
●
Using the Windows Remote Desktop application in a LAN network
●
Connecting a PC via the GPIB interface
Basic information on operating the R&S FPL1000 via remote control is provided here.
This information applies to all applications and operating modes on the R&S FPL1000.
For additional information on remote control of spectrum analyzers see the following
documents available from the Rohde & Schwarz website:
●
Remote control via SCPI
●
1EF62: Hints and Tricks for Remote Control of Spectrum and Network Analyzers
●
1MA171: How to use Rohde & Schwarz Instruments in MATLAB
●
1MA208: Fast Remote Instrument Control with HiSLIP
How to configure the remote control interfaces is described in
up a network and remote
●
Remote control interfaces and protocols
●
Status reporting system
●
GPIB languages
●
Network and remote control settings
●
How to set up a network and remote
9.1 Remote control interfaces and protocols
The instrument supports different interfaces and protocols for remote control. The fol-
lowing table gives an overview.
For a description of the protocols refer to
Manuel d'utilisation – 1179.5860.09 - 12
control", on page 582.
................................................................................................. 557
............................................................................................................. 569
........................................................................... 571
control.............................................................. 582
Remote control via
Network operation and remote control
Remote control interfaces and protocols
Chapter 9.5, "How to set
.................................................................... 553
SCPI.
559