Rohde & Schwarz FPL1000 Manuel D'utilisation page 606

®
R&S FPL1000
The firmware restarts and then automatically opens the "Soft Front Panel", i.e. the
user interface on which all front panel controls and the rotary knob are mapped to
buttons.
For more information see
on page 523.
8. To deactivate or activate the "Softfrontpanel", press the [F6] key.
After the connection is established, the R&S FPL1000 screen is displayed in the
"Remote Desktop" application window.
The Windows "Start" menu can be made available by expanding the "Remote
Desktop" window to full size.
During the connection with the controller, the login entry is displayed on the
R&S FPL1000 screen.
To terminate Remote Desktop control
The connection can be terminated by the controller or by a user at the R&S FPL1000:
1. On the controller, close the "Remote Desktop" window at any time.
The connection to the R&S FPL1000 is terminated.
2. On the R&S FPL1000, a user logs on.
The connection to the controller is terminated as a result. A message is displayed
on the controller display indicating that another user has assumed control of the
instrument.
Manuel d'utilisation 1179.5860.09 - 12
Network operation and remote control
How to set up a network and remote control
Chapter 8.2.2, "How to work with the soft front panels",
606 606