Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Useful commands for occupied bandwidth measurements described elsewhere
Configuring the channel:
●
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel<ch>]
●
[SENSe:]POWer:ACHannel:PRESet
●
[SENSe:]POWer:ACHannel:PRESet:RLEVel
Defining search limits:
●
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
●
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT
●
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHt
Performing the measurement:
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:SELect
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>[:STATe]
Retrieving results:
●
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:RESult?
Remote commands exclusive to occupied bandwidth measurements:
[SENSe:]POWer:BWIDth
[SENSe:]POWer:BANDwidth
[SENSe:]POWer:BWIDth <Percentage>
[SENSe:]POWer:BANDwidth <Percentage>
This command selects the percentage of the total power that defines the occupied
bandwidth.
Parameters:
<Percentage>
Example:
Manual operation:
10.6.6.2
Programming example: OBW measurement
This programming example demonstrates the measurement example described in
Chapter 6.2.6.5, "Measurement
//-----------Preparing the measurement ------------
//Reset the instrument
*RST
//-------------Configuring the Measurement-----------------------
//Set the center frequency to 800 MHz.
FREQ:CENT 800MHz
//Set the reference level to -10 dBm.
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
......................................................................................................... 650
................................................................................................... 650
Range:
10 PCT to 99.9 PCT
*RST:
99 PCT
Default unit: PCT
POW:BAND 95PCT
See
"% Power Bandwidth"
example",
on page 165 in a remote environment.
Remote commands
on page 847
on page 848
on page 848
on page 623
on page 624
on page 622
on page 162
656
656
Publicité
