Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<Length of length>
<Length of data>
<Value>
Example: #41024<Data>... contains 1024 data bytes
Data blocks larger than 999,999,999 bytes
According to SCPI, the header of the block data format allows for a maximum of 9
characters to describe the data length. Thus, the maximum REAL 32 data that can be
represented is 999,999,999 bytes. However, the R&S FPL1000 is able to send larger
data blocks. In this case, the length of the data block is placed in brackets, e.g.
#(10)1234567890<Data>....
Reading out data in binary format is quicker than in ASCII format. Thus, binary format
is recommended for large amounts of data.
10.8.7.6
Importing and exporting traces
FORMat:DEXPort:FORMat
FORMat:DEXPort:TRACes
FORMat:DEXPort:XDIStrib
FORMat:DIMPort:TRACes
MMEMory:LOAD<n>:TRACe
MMEMory:STORe<n>:TRACe
FORMat:DEXPort:FORMat <FileFormat>
Determines the format of the ASCII file to be imported or exported. Depending on the
external program in which the data file was created or will be evaluated, a comma-sep-
arated list (CSV) or a plain data format (DAT) file may be required.
Parameters:
<FileFormat>
Example:
Manual operation:
FORMat:DEXPort:TRACes <Selection>
This command selects the data to be included in a data export file (see
STORe<n>:TRACe
For details on exporting data see
Parameters:
<Selection>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Number of digits of the following number of data bytes
Number of following data bytes
2-byte/4-byte/8-byte floating point value
...................................................................................................... 832
...................................................................................................... 832
...................................................................................................... 833
....................................................................................................... 833
................................................................................................... 834
................................................................................................. 834
CSV | DAT
*RST:
DAT
FORM:DEXP:FORM CSV
See
"File Type"
on page 459
on page 834).
Chapter 6.13.2, "Trace/data
SINGle | ALL
Remote commands
MMEMory:
ex/import",
on page 457.
838
838
Publicité
