Rohde & Schwarz FPL1000 Manuel D'utilisation page 752

®
R&S FPL1000
Example:
Usage:
LAYout:REMove[:WINDow] <WindowName>
This command removes a window from the display in the active channel.
Setting parameters:
<WindowName>
Example:
Usage:
LAYout:REPLace[:WINDow] <WindowName>,<WindowType>
This command replaces the window type (for example from "Diagram" to "Result Sum-
mary") of an already existing window in the active channel setup while keeping its posi-
tion, index and window name.
To add a new window, use the
Setting parameters:
<WindowName>
<WindowType>
Example:
Usage:
LAYout:SPLitter <Index1>, <Index2>, <Position>
This command changes the position of a splitter and thus controls the size of the win-
dows on each side of the splitter.
Note that windows must have a certain minimum size. If the position you define con-
flicts with the minimum size of any of the affected windows, the command will not work,
but does not return an error.
Manuel d'utilisation 1179.5860.09 - 12
LAY:MOVE '1','3',REPL
Replaces the window named '3' by window 1. Window 3 is
deleted.
Setting only
String containing the name of the window. In the default state,
the name of the window is its index.
LAY:REM '2'
Removes the result display in the window named '2'.
Setting only
LAYout:ADD[:WINDow]?
String containing the name of the existing window.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows in the active
channel setup, use the
Type of result display you want to use in the existing window.
LAYout:ADD[:WINDow]?
See
ble window types.
LAY:REPL:WIND '1',MTAB
Replaces the result display in window 1 with a marker table.
Setting only
Remote commands
Remote commands for result displays
command.
LAYout:CATalog[:WINDow]?
on page 743 for a list of availa-
query.
752 752