Rohde & Schwarz FPL1000 Manuel D'utilisation page 864

®
R&S FPL1000
Manual operation:
CALCulate<n>:DELTamarker<m>:Y?
Queries the result at the position of the specified delta marker.
Suffix:
<n>
<m>
Return values:
<Result>
Usage:
CALCulate<n>:MARKer<m>:Y?
Queries the result at the position of the specified marker.
Suffix:
<n>
<m>
Return values:
<Result>
Usage:
Manual operation:
10.8.8.6 Marker search (spectrograms)
The following commands automatically define the marker and delta marker position in
the spectrogram.
The usage of these markers is demonstrated in
example: configuring a
Using markers
The following commands control spectrogram markers.
Useful commands for spectrogram markers described elsewhere
The following commands define the horizontal position of the markers.
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
See "Marker 1/Marker 2/Marker 3/Marker 4"
See "Marker 1/Marker 2/Marker 3"
1..n
1..n
Result at the position of the delta marker.
The unit is variable and depends on the one you have currently
set.
Default unit: DBM
Query only
1..n
1..n
Default unit: DBM
Query only
See "Marker Table" on page 124
See "Marker Peak List"
spectrogram", on page 834.
Remote commands
on page 250
on page 254
on page 124
Chapter 10.8.7.7, "Programming
864 864