Rohde & Schwarz FPL1000 Manuel D'utilisation page 871

®
R&S FPL1000
Suffix:
<n>
<m>
Parameters:
<SearchArea>
Manual operation:
CALCulate<n>:DELTamarker<m>:SGRam:XY:MAXimum[:PEAK]
CALCulate<n>:DELTamarker<m>:SPECtrogram:XY:MAXimum[:PEAK]
This command moves a marker to the highest level of the spectrogram over all fre-
quencies.
Suffix:
<n>
<m>
CALCulate<n>:DELTamarker<m>:SGRam:XY:MINimum[:PEAK]
CALCulate<n>:DELTamarker<m>:SPECtrogram:XY:MINimum[:PEAK]
This command moves a delta marker to the minimum level of the spectrogram over all
frequencies.
Suffix:
<n>
<m>
CALCulate<n>:DELTamarker<m>:SGRam:Y:MAXimum:ABOVe
CALCulate<n>:DELTamarker<m>:SPECtrogram:Y:MAXimum:ABOVe
This command moves a marker vertically to the next higher level for the current fre-
quency.
The search includes only frames above the current marker position. It does not change
the horizontal position of the marker.
Suffix:
<n>
<m>
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
irrelevant
irrelevant
VISible
Performs a search within the visible frames.
Note that the command does not work if the spectrogram is not
visible for any reason (e.g. if the display update is off).
MEMory
Performs a search within all frames in the memory.
*RST: VISible
See "Marker Search Area"
Window
Marker
Window
Marker
Window
Marker
See "Search Mode for Next Peak in Y-Direction"
Remote commands
on page 368
on page 367
871 871