Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<m>
Parameters:
<MaxNoPeaks>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT <SortMode>
This command selects the order in which the results of a peak search are returned.
Suffix:
<n>
<m>
Parameters:
<SortMode>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe <State>
This command turns a peak search on and off.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Marker
Maximum number of peaks to be determined.
Range:
1 to 500
*RST:
50
CALC:MARK:FUNC:FPE:LIST:SIZE 10
The marker peak list will contain a maximum of 10 peaks.
See
"Maximum Number of Peaks"
Window
Marker
X
Sorts the peaks according to increasing position on the x-axis.
Y
Sorts the peaks according to decreasing position on the y-axis.
*RST:
X
CALC:MARK:FUNC:FPE:SORT Y
Sets the sort mode to decreasing y values
See
"Sort Mode"
on page 390
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:MARK:FUNC:FPE:STAT ON
Activates marker peak search
See
"Peak List State"
on page 390
Remote commands
on page 391
878
878
Publicité
