Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
MMEMory:SELect:CHANnel[:ITEM]:SCData <State>
MMEMory:SELect[:ITEM]:SCData <State>
This command includes or excludes source calibration data for an optional external
generator when storing or loading a configuration file.
Parameters:
<State>
Example:
Manual operation:
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram <State>
MMEMory:SELect:CHANnel[:ITEM]:SGRam <State>
MMEMory:SELect[:ITEM]:SPECtrogram <State>
MMEMory:SELect[:ITEM]:SGRam <State>
This command includes or excludes spectrogram data when storing or loading a con-
figuration file.
Parameters:
<State>
Example:
Manual operation:
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive] <State>
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive] <State>
This command includes or excludes trace data when storing or loading a configuration
file.
Suffix:
<1...3>
Parameters:
<State>
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
ON | OFF | 1 | 0
*RST:
0
MMEM:SEL:SCD ON
Adds the source calibration data to the list of data subsets.
See
"Items:"
on page 475
ON | OFF | 1 | 0
*RST:
0
MMEM:SEL:SGR ON
Adds the spectrogram data to the list of data subsets.
See
"Items:"
on page 475
irrelevant
ON | OFF | 1 | 0
*RST:
0, i.e. no traces are stored
MMEM:SEL:TRAC ON
See
"Items:"
on page 475
Remote commands
Managing settings and results
933
933
Publicité
