Rohde & Schwarz FPL1000 Manuel D'utilisation page 941

®
R&S FPL1000
<ci>
Example:
Manual operation:
Gui setting
"Screen Colors (Print)"
"Optimized Colors"
"Screen Colors
(Screenshot)"
HCOPy:DESTination<1|2> <arg0>
This command selects the destination of a print job.
Note: To print a screenshot to a file, see
on page 936.
Suffix:
<1|2>
Parameters:
<arg0>
Manuel d'utilisation 1179.5860.09 - 12
See table below
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a print-
out.
See "Print Colors" on page 520
Description
Selects the current screen colors for the
printout. The background is always printed in
white and the grid in black.
Selects an optimized color setting for the
printout to improve the visibility of the colors
(default setting). Trace 1 is blue, trace 2
black, trace 3 green, and the markers are
turquoise. The background is always printed
in white and the grid in black.
Selects the current screen colors without any
changes for a screenshot.
HCOPy:DEVice:LANGuage<1|2>
Irrelevant.
'MMEM'
Activates "Print to file". Thus, if the destination of the print func-
tion is set to "printer" (see
cate:PRINter'
or
ected to a .PRN file using the selected printer driver.
Select the file name with MMEMory:NAME.
Note: To save a screenshot to a file, see
LANGuage<1|2>
on page 936.
'SYSTem:COMMunicate:PRINter'
Sends the hardcopy to a printer and deactivates "print to file".
Select the printer with
SELect<1|2>
.
'SYSTem:COMMunicate:CLIPboard'
Sends the hardcopy to the clipboard.
*RST: 'SYST:COMM:CLIP'
Remote commands
Managing settings and results
Remote command
HCOP:CMAP:DEF1
HCOP:CMAP:DEF2
HCOP:CMAP:DEF4
HCOP:DEST1 'SYSTem:COMMuni
HCOP:DEV:LANG GDI), the output is redir-
HCOPy:DEVice:
SYSTem:COMMunicate:PRINter:
941 941