Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
DISPlay:TOUChscreen[:STATe] <State>
This command controls the touch screen functionality.
Parameters:
<State>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TIME <State>
This command adds or removes the date and time from the display.
Suffix:
<n>
Parameters:
<State>
Example:
Manual operation:
DISPlay[:WINDow<n>]:TIME:FORMat <Format>
This command selects the time and date format.
Suffix:
<n>
Parameters:
<Format>
Manuel d'utilisation 1179.5860.09 - 12
ON | FRAMe | OFF
ON | 1
Touch screen is active for entire screen
OFF | 0
Touch screen is inactivate for entire screen
FRAMe
Touch screen is inactivate for the diagram area of the screen,
but active for softkeys, toolbars and menus.
*RST:
1
DISP:TOUC:STAT ON
See
"Deactivating and Activating the Touchscreen"
irrelevant
ON | OFF | 1 | 0
*RST:
0
DISP:TIME ON
See
"Date and Time"
on page 517
irrelevant
US | DE
DE
dd.mm.yyyy hh:mm:ss
24 hour format.
US
mm/dd/yyyy hh:mm:ss
12 hour format.
*RST:
DE
Remote commands
Configuring the R&S FPL1000
on page 515
975
975
Publicité
