Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
When you turn the measurement on, the R&S FPL1000 activates a marker and posi-
tions it on the peak power level in the marker search range.
Suffix:
<n>
<m>
Parameters:
<State>
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:MEAN[:STATe] <State>
This command turns the evaluation to determine the mean time domain power on and
off.
The R&S FPL1000 performs the measurement on the trace marker 1 is positioned on.
Suffix:
<n>
<m>
Parameters:
<State>
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:PPEak[:STATe] <State>
This command turns the evaluation to determine the positive peak time domain power
on and off.
The R&S FPL1000 performs the measurement on the trace marker 1 is positioned on.
Suffix:
<n>
<m>
Parameters:
<State>
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary:RMS[:STATe] <State>
This command turns the evaluation to determine the RMS time domain power on and
off.
The R&S FPL1000 performs the measurement on the trace marker 1 is positioned on.
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
Window
Marker
ON | OFF | 1 | 0
*RST:
0
Window
Marker
ON | OFF | 1 | 0
*RST:
0
See
"Results"
on page 234
Window
Marker
ON | OFF | 1 | 0
*RST:
0
See
"Results"
on page 234
Remote commands
712
712
Publicité
