Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<md>
Parameters:
<State>
Example:
CALCulate<n>:MARKer<ms>:LINK:TO:MARKer<md> <State>
This command links the normal source marker <ms> to any active destination marker
<md> (normal or delta marker).
If you change the horizontal position of marker <md>, marker <ms> changes its hori-
zontal position to the same value.
Suffix:
<n>
<ms>
<md>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>[:STATe] <State>
This command turns markers on and off. If the corresponding marker number is cur-
rently active as a delta marker, it is turned into a normal marker.
Suffix:
<n>
<m>
Parameters:
<State>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
destination marker, see
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:MARK4:LINK:TO:DELT2 ON
Links marker 4 to delta marker 2.
Window
source marker, see
Marker
destination marker, see
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:MARK4:LINK:TO:MARK2 ON
Links marker 4 to marker 2.
See
"Linking to Another Marker"
See
"Linking to Another Marker"
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
Remote commands
Marker
Marker
on page 270
on page 360
849
849
Publicité
