Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<li>
Parameters:
<InterpolType>
Manual operation:
CALCulate<n>:LIMit<li>:LOWer:STATe <State>
This command turns a lower limit line on and off.
Before you can use the command, you have to select a limit line with
LIMit<li>:NAME
Suffix:
<n>
<li>
Parameters:
<State>
Manual operation:
CALCulate<n>:LIMit<li>:LOWer:THReshold <Threshold>
This command defines a threshold for relative limit lines.
The R&S FPL1000 uses the threshold for the limit check, if the limit line violates the
threshold.
Suffix:
<n>
<li>
Parameters:
<Threshold>
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Limit line
LINear | LOGarithmic
*RST:
LIN
See
"Y-Axis"
on page 441
on page 908.
irrelevant
Limit line
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
See
"Visibility"
on page 438
irrelevant
Limit line
Numeric value.
The unit depends on
on page 908.
*RST:
-200 dBm
Default unit: DBM
See
"Threshold"
on page 440
Remote commands
CALCulate<n>:LIMit<li>:UNIT
CALCulate<n>:
913
913
Publicité
