Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
CALCulate<n>:PSEarch:PSHow
CALCulate<n>:PEAKsearch:PSHow
CALCulate<n>:PSEarch:SUBRanges
CALCulate<n>:PEAKsearch:SUBRanges
CALCulate<n>:PSEarch:AUTO <State>
CALCulate<n>:PEAKsearch:AUTO <State>
This command turns the list evaluatio
n on and off.
Suffix:
<n>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:ESPectrum:PSEarch:DETails <State>
CALCulate<n>:ESPectrum:PEAKsearch:DETails <State>
This command configures how detailed the list in the Result Summary is.
Suffix:
<n>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:PSEarch:MARGin <Threshold>
CALCulate<n>:PEAKsearch:MARGin <Margin>
This command defines the threshold of the list evaluation.
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
.............................................................................................. 691
....................................................................................... 691
...................................................................................... 691
................................................................................ 691
Window
ON | OFF | 0 | 1
*RST:
1
CALC:PSE:AUTO OFF
Deactivates the list evaluation.
See
"List Evaluation State"
Window
ON | OFF | 1 | 0
ON | 1
Includes all detected peaks (up to a maximum defined by
CALCulate<n>:PEAKsearch:SUBRanges
OFF | 0
Includes only one peak per range.
*RST:
0
CALC:ESP:PSE:DET ON
CALC:PSE:SUBR 10
Includes up to 10 peaks per range in the list.
See
"Details"
on page 215
Remote commands
on page 214
on page 691).
696
696
Publicité
