Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Parameters:
<IDNFormat>
10.10.8
Using service functions
DIAGnostic:SERVice:SFUNction
DIAGnostic:SERVice:SFUNction:LASTresult?
DIAGnostic:SERVice:SFUNction:RESults:DELete
DIAGnostic:SERVice:SFUNction:RESults:SAVE
DIAGnostic:SERVice:SINFo?
SYSTem:PASSword[:CENable]
SYSTem:PASSword:RESet
DIAGnostic:SERVice:SFUNction <ServiceFunction>
This command starts a service function.
The service functions are available after you have entered the level 1 or level 2 system
password.
Parameters for setting and query:
<ServiceFunction>
Example:
Manual operation:
DIAGnostic:SERVice:SFUNction:LASTresult?
This command queries the results of the most recent service function you have used.
Return values:
<Result>
Usage:
Manuel d'utilisation 1179.5860.09 - 12
NEW | FSL
R&S FPL1000 format
Format is also compatible to the R&S FSL and R&S FSV family
*RST:
not reset!
............................................................................................. 980
......................................................................... 980
................................................................... 981
..................................................................... 981
................................................................................................... 981
............................................................................................... 982
..................................................................................................... 982
String containing the ID of the service function.
The ID of the service function is made up out of five numbers,
separated by a point.
• function group number
• board number
• function number
• parameter 1 (see the Service Manual)
• parameter 2 (see the Service Manual)
DIAG:SERV:SFUN 'Function1'
DIAG:SERV:SFUN? 'Function2'
See
"Service Function"
See
"Send"
on page 534
Query only
Remote commands
Configuring the R&S FPL1000
on page 534
986
986
Publicité
