Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Remote commands exclusive to transducer management
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe]
[SENSe:]CORRection:TRANsducer:CATalog?
[SENSe:]CORRection:TRANsducer:COMMent
[SENSe:]CORRection:TRANsducer:DATA
[SENSe:]CORRection:TRANsducer:DELete
[SENSe:]CORRection:TRANsducer:SCALing
[SENSe:]CORRection:TRANsducer:SELect
[SENSe:]CORRection:TRANsducer[:STATe]
[SENSe:]CORRection:TRANsducer:UNIT
MMEMory:LOAD<n>:TFACtor
MMEMory:STORe<n>:TFACtor
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe] <State>
This command turns an automatic adjustment of the reference level to the transducer
on and off.
Before you can use the command, you have to select and turn on a transducer.
Parameters:
<State>
Manual operation:
[SENSe:]CORRection:TRANsducer:CATalog?
This command queries all transducer factors stored on the R&S FPL1000.
After general data for the transducer storage directory, data for the individual files is lis-
ted.
The result is a comma-separated list of values with the following syntax:
<UsedMem>,<FreeMem>,<FileSize>,<FileName>[,<FileSize>,<FileName>]
Return values:
<UsedDiskSpace>
<FreeDiskSpace>
<FileSize>
<FileName>
Manuel d'utilisation 1179.5860.09 - 12
........................................................................ 963
........................................................................ 964
.............................................................................. 964
............................................................................ 964
.......................................................................... 965
............................................................................ 965
........................................................................... 965
................................................................................ 965
................................................................................................. 966
............................................................................................... 966
ON | OFF | 1 | 0
*RST:
0
See
"Adjust Ref Level"
numeric value in bytes
Amount of storage space required by all transducers files in the
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\trd directory
(= sum of all individual <FileSize> values)
numeric value in bytes
Amount of free storage space on the R&S FPL1000
numeric value in bytes
Size of a single transducer file
string
Name of a single transducer file
Remote commands
Configuring the R&S FPL1000
................................................. 963
on page 540
969
969
Publicité
