Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>[:STATe] <State>
This command turns a trace on and off.
The measurement continues in the background.
Suffix:
<n>
<w>
<t>
Parameters:
<State>
Example:
Manual operation:
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:SMOothing:APERture
This command defines the degree (aperture) of the trace smoothing, if
WINDow<n>][:SUBWindow<w>]:TRACe<t>:SMOothing[:STATe]TRUE.
Suffix:
<n>
<w>
<t>
Parameters:
<Aperture>
Example:
Manual operation:
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:SMOothing[:STATe] <State>
This command turns trace smoothing for a particular trace on and off.
Manuel d'utilisation 1179.5860.09 - 12
Window
subwindow
Not supported by all applications
Trace
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
DISP:TRAC3 ON
See
"Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6"
on page 404
See
"Trace 1/ Trace 2/ Trace 3/ Trace 4 (Softkeys)"
<Aperture>
Window
subwindow
Trace
Range:
*RST:
Default unit: PCT
DISP3:TRAC2:SMO:APER 5
Defines an aperture of 5% for trace 2 in window 3
See
"Smoothing"
Setting basic spectrum RF measurement parameters
1 to 50
2
on page 406
Remote commands
on page 408
DISPlay[:
820
820
Publicité
