Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
FETCh:PMETer<p>?
This command queries the results of power sensor measurements.
Suffix:
<p>
Usage:
READ:PMETer<p>?
This command initiates a power sensor measurement and queries the results.
Suffix:
<p>
Usage:
[SENSe:]PMETer<p>:DCYCle[:STATe] <State>
This command turns the duty cycle correction on and off.
Suffix:
<p>
Parameters:
<State>
Example:
Manual operation:
[SENSe:]PMETer<p>:DCYCle:VALue <Percentage>
This command defines the duty cycle for the correction of pulse signals.
The power sensor uses the duty cycle in combination with the mean power to calculate
the power of the pulse.
Suffix:
<p>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
CALC:PMET2:REL:STAT ON
Activates the relative display of the measured value for power
sensor 2.
Power sensor index
Query only
Power sensor index
Query only
Power sensor index
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
PMET2:DCYC:STAT ON
See
"Duty Cycle"
on page 289
Power sensor
Remote commands
797
797
Publicité
