Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
●
LAN device name defines the protocol and the instance number of a subinstru-
ment;
–
–
●
INSTR indicates the instrument resource class (optional)
●
port determines the used port number
●
SOCKET indicates the raw network socket resource class
Example:
●
Instrument has the IP address 192.1.2.3; the valid resource string using VXI-11
protocol is:
TCPIP::192.1.2.3::INSTR
●
The DNS host name is FPL1004-123456; the valid resource string using HiSLIP is:
TCPIP::FPL1004-123456::hislip0
●
A raw socket connection can be established using:
TCPIP::192.1.2.3::5025::SOCKET
Identifying instruments in a network
If several instruments are connected to the network, each instrument has its own IP
address and associated resource string. The controller identifies these instruments by
the resource string.
For details on configuring the LAN connection, see
network",
●
LAN web browser interface
9.1.1.1
LAN web browser interface
The LAN web browser interface allows for easy configuration of the LAN and remote
control of the R&S FPL1000 without additional installation requirements.
The instrument's LAN web browser interface works correctly with all W3C compliant
browsers.
Via the web browser interface to the R&S FPL1000 you can control the instrument
remotely from another PC. Manual instrument controls are available via the front panel
simulation. File upload and download between the instrument and the remote PC is
also available. Using this feature, several users can access and operate the
R&S FPL1000 simultaneously. This is useful for troubleshooting or training purposes.
For details, see
interface",
web browser
Manuel d'utilisation – 1179.5860.09 - 12
inst0 selects the VXI-11 protocol (default)
hislip0 selects the newer HiSLIP protocol
on page 582.
Chapter 9.5.1.4, "How to configure the LAN using the web browser
on page 586 and
Chapter 9.5.5, "How to control the R&S FPL1000 via the
interface",
on page 592.
Network operation and remote control
Remote control interfaces and protocols
Chapter 9.5.1, "How to configure a
........................................................................................... 555
561
Publicité
