Rohde & Schwarz FPL1000 Manuel D'utilisation page 859

®
R&S FPL1000
Example:
Manual operation:
CALCulate<n>:MARKer<m>:MINimum:LEFT
This command moves a marker to the next minimum peak value.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MINimum:NEXT
This command moves a marker to the next minimum peak value.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
This command moves a marker to the minimum level.
In the spectrogram, the command moves a marker horizontally to the minimum level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Suffix:
<n>
<m>
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
CALC:MARK:MIN:AUTO ON
Activates the automatic minimum value search function for
marker 1 at the end of each particular sweep.
See "Auto Max Peak Search / Auto Min Peak Search"
on page 365
Window
Marker
See "Search Next Minimum"
Window
Marker
See "Search Next Minimum"
Window
Marker
See "Search Minimum"
Remote commands
on page 370
on page 370
on page 370
859 859