Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
This command moves a marker to the highest level.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MAXimum:RIGHt
This command moves a marker to the next positive peak.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MINimum:AUTO <State>
This command turns an automatic marker peak search for a trace minimum on and off.
The R&S FPL1000 performs the peak search after each sweep.
Suffix:
<n>
<m>
Parameters:
<State>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Marker
See
"Search Next Peak"
Window
Marker
See
"Peak Search"
on page 370
Window
Marker
See
"Search Next Peak"
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Remote commands
on page 370
on page 370
858
858
Publicité
