Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
MMEMory:STORe<1|2>:STATe <1>, <FileName>
This command saves the current instrument configuration in a *.dfl file.
Suffix:
<1|2>
Parameters:
<1>
<FileName>
Example:
Manual operation:
MMEMory:STORe<1|2>:STATe:NEXT
This command saves the current instrument configuration in a *.dfl file.
The file name depends on the one you have set with
on page 931. This command adds a consecutive number to the file name.
Suffix:
<1|2>
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
INST:SEL 'SPECTRUM2'
//Selects channel setup 'SPECTRUM2'.
MMEM:STOR:TYP CHAN
//Specifies that channel setup data is to be stored.
MMEM:STOR:STAT 1, 'C:\Analyzer\Spectrum'
//Stores the settings from channel setup
//'SPECTRUM2' to the file 'C:\Analyzer\Spectrum'.
MMEM:LOAD:TYPE NEW
//Specifies that channel setups are to be loaded
//in a new channel setup.
MMEM:LOAD:STAT 1, 'C:\Analyzer\Spectrum'
//Loads the channel setup from the file
//'C:\Analyzer\Spectrum' to the new channel setup
//'SPECTRUM2*'.
irrelevant
String containing the path and name of the target file.
The file extension is .dfl.
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
See
"Save File"
on page 475
See
"Save"
on page 543
irrelevant
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_001.dfl
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_002.dfl
See
"Save File"
on page 475
Remote commands
Managing settings and results
MMEMory:STORe<1|2>:STATe
937
937
Publicité
