Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
Manual operation:
HCOPy[:IMMediate<1|2>]
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME.
Suffix:
<1|2>
Manual operation:
HCOPy[:IMMediate<1|2>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Suffix:
<1|2>
Manual operation:
HCOPy:ITEM:WINDow<1|2>:TEXT <Comment>
This command defines a comment to be added to the printout.
Manuel d'utilisation 1179.5860.09 - 12
GDI
Graphics Device Interface
Default format for output to a printer configured under Windows.
Must be selected for output to the printer interface.
Can be used for output to a file. The printer driver configured
under Windows is used to generate a printer-specific file format.
BMP, JPG, PNG
Data format for output to files only.
DOC | PDF
File type for test reports
HCOP:MODE REPort
Available for
To print a screenshot to a PNG file:
//Destination: PNG file
HCOP:DEV:LANG PNG
//Define file name
MMEM:NAME 'C:\R_S\instr\user\MeasurementTestReport.png'
//Print
HCOP:IMM
See
"Destination: File"
See
"File type"
on page 500
See
"File type"
on page 509
Irrelevant.
See
"Print"
on page 488
See
"Save"
on page 510
Irrelevant. Suffix 2 is not allowed
See
"Print"
on page 488
Remote commands
Managing settings and results
on page 490
943
943
Publicité
