Rohde & Schwarz FPL1000 Manuel D'utilisation page 598

®
R&S FPL1000
2. Enter the command
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\user\
NO_AUTOLOGIN.REG.
3. Press the [ENTER] key to confirm.
The auto-login function is deactivated. The next time you switch on the instrument,
you are prompted to enter your user name and password before the firmware is
started.
Reactivating the auto-login function
To reactivate the auto-login function after manually deactivating it, perform the follow-
ing steps:
1. In the "Start" menu, select "Run".
The "Run" dialog box is displayed.
2. Enter the command
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\user\
AUTOLOGIN.REG.
3. Press the [ENTER] key to confirm.
The auto-login function is reactivated. It will be applied the next time the instrument
is switched on.
9.5.4 How to share directories (only with microsoft networks)
Sharing directories makes data available for other users. This is only possible in Micro-
soft networks. Sharing is a property of a file or directory.
1. In the "Start" menu, select "Programs", "Accessories" and then select "Windows
Explorer".
2. Select the desired folder with the right mouse button.
3. In the context menu, select "Sharing with > Specific people".
The dialog box for sharing a directory is displayed.
4. Select a user from the list or add a new name and select the "Add" button.
5. Select the "Share" button.
6. Select "Done" to close the dialog box.
The drive is shared and can be accessed by the selected users.
9.5.5 How to control the R&S FPL1000 via the web browser interface
Via the LAN web browser interface to the R&S FPL1000, one or more users can con-
trol the instrument remotely from another PC without additional installation. Most instru-
ment controls are available via the front panel simulation. File upload and download
between the instrument and the remote PC is also available.
Manuel d'utilisation 1179.5860.09 - 12
Network operation and remote control
How to set up a network and remote control
598 598