Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel <State>
This command turns the weighting filter for the adjacent channel on and off.
Parameters:
<State>
Manual operation:
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL] <State>
This command turns the weighting filters for all channels on and off.
Parameters:
<State>
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ALTernate<ch> <State>
This command turns the weighting filter for an alternate channel on and off.
Suffix:
<ch>
Parameters:
<State>
Manual operation:
[SENSe:]POWer:ACHannel:FILTer[:STATe]:CHANnel<ch> <State>
This command turns the weighting filter for a transmission channel on and off.
Suffix:
<ch>
Parameters:
<State>
Manual operation:
10.6.4.4
Selecting the reference channel
The following commands define the reference channel for relative ACLR measure-
ments.
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
ON | OFF | 1 | 0
*RST:
0
See
"Weighting Filters"
ON | OFF | 1 | 0
*RST:
0
1..n
Alternate channel number
ON | OFF | 1 | 0
*RST:
0
See
"Weighting Filters"
1..n
Tx channel number
ON | OFF | 1 | 0
*RST:
0
See
"Weighting Filters"
Remote commands
on page 147
on page 147
on page 147
643
643
Publicité
