Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Manual operation:
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STARt <Level>
This command defines a relative limit for a SEM range.
Unlike manual operation, you can define a relative limit regardless of the limit check
mode.
Suffix:
<sb>
<ri>
<li>
Parameters:
<Level>
Example:
Manual operation:
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STARt:ABS <Level>
This command defines an absolute limit for the MAX function of the relative limit for a
SEM range.
For more information see
Suffix:
<sb>
<ri>
<li>
Parameters:
<Level>
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
See
"Abs Limit Start / Stop <n>"
1 to 3
1..n
Selects the SEM range.
1..n
Power class for which the limit is defined.
Relative limit at the start frequency of a SEM range.
Range:
-400 to 400
*RST:
-50
Default unit: dBc
SENS:ESP:RANG:LIM:REL:STAR -10
See
"Rel Limit Start / Stop <n>"
"Relative limit line functions"
1 to 3
1..n
Selects the SEM range.
1..n
Power class for which the limit is defined.
Absolute limit at the start frequency of a SEM range to be used
in addition to the relative limit if the MAX function is enabled (see
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:
RELative:STARt:FUNCtion
Range:
-400 to 400
*RST:
-13
Default unit: dBm
Remote commands
on page 183
on page 183
on page 173.
on page 663).
668
668
Publicité
