Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
Manual operation:
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT <SearchLimit>
This command defines the left limit of the marker search range for all markers in all
windows.
If you perform a measurement in the time domain, this command limits the range of the
trace to be analyzed.
Suffix:
<n>
<m>
Parameters:
<SearchLimit>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHt <SearchLimit>
This command defines the right limit of the marker search range for all markers in all
windows.
If you perform a measurement in the time domain, this command limits the range of the
trace to be analyzed.
Suffix:
<n>
<m>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
ON | 1
Switches the function on
CALC:MARK:X:SLIM ON
Switches on search limitation.
See
"Search Limits (Left / Right)"
See
"Deactivating All Search Limits"
See
"Limit State"
on page 235
irrelevant
irrelevant
The value range depends on the frequency range or sweep
time.
The unit is Hz for frequency domain measurements and s for
time domain measurements.
*RST:
left diagram border
Default unit: HZ
CALC:MARK:X:SLIM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:LEFT 10MHz
Sets the left limit of the search range to 10 MHz.
See
"Search Limits (Left / Right)"
See
"Left Limit / Right Limit"
irrelevant
irrelevant
Remote commands
on page 163
on page 163
on page 163
on page 235
854
854
Publicité
