Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Suffix:
<sb>
Parameters:
<Alpha>
Manual operation:
[SENSe:]ESPectrum<sb>:FILTer[:RRC][:STATe] <State>
This command turns the RRC filter in the reference range on and off.
The RRC filter is available if the power reference is the channel power.
Suffix:
<sb>
Parameters:
<State>
Manual operation:
[SENSe:]ESPectrum<sb>:RRANge?
This command queries the reference range.
Suffix:
<sb>
Return values:
<RefRange>
Usage:
[SENSe:]ESPectrum<sb>:RTYPe <Type>
This command defines the type of the power reference.
Suffix:
<sb>
Parameters:
<Type>
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
1 to 3
Sub block in a Multi-SEM measurement
Range:
0 to 1
*RST:
0.22
See
"Alpha:"
on page 188
1 to 3
Sub block in a Multi-SEM measurement
ON | OFF | 0 | 1
*RST:
1
See
"RRC Filter State"
1 to 3
Sub block in a Multi-SEM measurement
Number of the current reference range.
Range:
1 to 30
Query only
1 to 3
Sub block in a Multi-SEM measurement
PEAK | CPOWer
PEAK
Measures the highest peak within the reference range.
Remote commands
on page 187
676
676
Publicité
