Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Example:
Manual operation:
CALCulate<n>:MATH<t>:POSition <Position>
This command defines the position of the trace resulting from the mathematical opera-
tion.
Suffix:
<n>
<t>
Parameters:
<Position>
Example:
Manual operation:
CALCulate<n>:MATH<t>:STATe <State>
This command turns the trace mathematics on and off.
Suffix:
<n>
<t>
Parameters:
<State>
Example:
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
LOGarithmic
Logarithmic calculation.
POWer
Linear power calculation.
*RST:
LOGarithmic
CALC:MATH:MODE LIN
Selects linear calculation.
See
"Trace Math Mode"
Window
irrelevant
Vertical position of the trace in % of the height of the diagram
area.
100 PCT corresponds to the upper diagram border.
Range:
-100 to 200
*RST:
50
Default unit: PCT
CALC:MATH:POS 100
Moves the trace to the top of the diagram area.
See
"Trace Math Position"
Window
irrelevant
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:MATH:STAT ON
Turns on trace mathematics.
Remote commands
on page 428
on page 428
833
833
Publicité
