Rohde & Schwarz FPL1000 Manuel D'utilisation page 563

®
R&S FPL1000
–
●
"Instrument Control"
–
–
–
(See
face",
●
"License Manager"
–
●
"Help"
"www.rohde-schwarz.com" opens the Rohde & Schwarz home page.
9.2 Status reporting system
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. Both can be queried via GPIB bus or LAN interface
using the STATus... commands.
(See
For details on the status reporting system, see
●
Hierarchy of status registers
●
Contents of the status registers
●
Reset values of the status reporting system
9.2.1 Hierarchy of status registers
As shown in the following figure, the status information is of hierarchical structure.
Manuel d'utilisation – 1179.5860.09 - 12
"Utilities" provides access to an event log.
"Web Control" provides remote access to the instrument via VNC (no installa-
tion required). Manual instrument controls are available via the front panel sim-
ulation.
"File Download" downloads files from the instrument.
"File Upload" uploads files to the instrument.
Chapter 9.5.5, "How to control the R&S FPL1000 via the web browser inter-
on page 592.)
"License Manager" allows you to install or uninstall license keys and to acti-
vate, register or unregister licenses.
Chapter 10.12, "Using the status
Network operation and remote control
register", on page 1015).
Remote control via
......................................................................................... 557
................................................................................... 558
.............................................................. 569
Status reporting system
SCPI.
563