Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Suffix:
<ri>
Parameters:
<State>
Example:
Manual operation:
[SENSe:]LIST:RANGe<ri>:TRANsducer <Transducer>
This command selects a transducer factor for a spurious emission measurement
range.
Note the following prerequisites for the selected transducer:
●
The transducer must cover at least the span of the range.
●
The x-axis has to be linear.
●
The unit has to be dB.
Suffix:
<ri>
Parameters:
<Transducer>
Example:
Manual operation:
10.6.8.3
Configuring the list evaluation
The following commands configure the list evaluation.
Useful commands for spurious emission measurements described elsewhere
●
MMEMory:STORe<n>:LIST
Remote commands exclusive to spurious emission measurements
CALCulate<n>:PSEarch:AUTO
CALCulate<n>:PEAKsearch:AUTO
CALCulate<n>:ESPectrum:PSEarch:DETails
CALCulate<n>:ESPectrum:PEAKsearch:DETails
CALCulate<n>:PSEarch:MARGin
CALCulate<n>:PEAKsearch:MARGin
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
1..n
Selects the measurement range.
ON | OFF | 0 | 1
*RST:
1
LIST:RANG2:SWE:TIME:AUTO ON
See
" Sweep Time Mode "
1..n
Selects the measurement range.
String containing the transducer file name. Do not include a file
extension or the file path.
The file must be located in the
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\
trd directory.
LIST:RANG2:TRAN 'MYTRANS'
See
"Transducer"
on page 212
on page 944
................................................................................................ 690
......................................................................................... 690
.......................................................................... 690
.................................................................... 690
............................................................................................ 690
...................................................................................... 690
Remote commands
on page 211
695
695
Publicité
