Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
TRAC:DATA? TRACE4
//Returns one power value per sweep point for each trace.
TRAC:DATA:X?
//Returns one frequency value per sweep point for each trace.
10.7 Remote commands for result displays
●
Working with windows in the display
●
Examples: configuring the result display
10.7.1
Working with windows in the display
The following commands are required to change the evaluation type and rearrange the
screen layout for a channel setup as you do using the SmartGrid in manual operation.
Since the available evaluation types depend on the selected application, some param-
eters for the following commands also depend on the selected channel setup.
Note that the suffix <n> always refers to the window in the currently selected channel
setup.
(See
LAYout:ADD[:WINDow]?
LAYout:CATalog[:WINDow]?
LAYout:IDENtify[:WINDow]?
LAYout:MOVE[:WINDow]
LAYout:REMove[:WINDow]
LAYout:REPLace[:WINDow]
LAYout:SPLitter
LAYout:WINDow<n>:ADD?
LAYout:WINDow<n>:IDENtify?
LAYout:WINDow<n>:REMove
LAYout:WINDow<n>:REPLace
LAYout:WINDow<n>:TYPE
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display in the active channel setup.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the
Query parameters:
<WindowName>
Manuel d'utilisation 1179.5860.09 - 12
INSTrument[:SELect]
.......................................................................................................... 743
........................................................................................................... 744
.................................................................................................... 745
......................................................................................................... 745
...................................................................................................... 746
.................................................................................................... 746
............................................................................................................................... 746
...................................................................................................... 748
................................................................................................. 749
...................................................................................................... 750
String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]?
Remote commands for result displays
........................................................................... 743
.................................................................... 750
on page 613).
................................................................................................ 748
................................................................................................ 749
LAYout:REPLace[:WINDow]
Remote commands
command.
query.
749
749
Publicité
