Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
CALCulate<n>:MARKer<m>:MINimum:NEXT
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
CALCulate<n>:MARKer<m>:MINimum:RIGHt
CALCulate<n>:MARKer<m>:MAXimum:AUTO <State>
This command turns an automatic marker peak search for a trace maximum on and
off. The R&S FPL1000 performs the peak search after each sweep.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:MAXimum:LEFT
This command moves a marker to the next positive peak.
The search includes only measurement values to the left of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
<m>
Manual operation:
CALCulate<n>:MARKer<m>:MAXimum:NEXT
This command moves a marker to the next positive peak.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
......................................................................... 853
....................................................................... 853
......................................................................... 854
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
CALC:MARK:MAX:AUTO ON
Activates the automatic peak search function for marker 1 at the
end of each particular sweep.
See
"Auto Max Peak Search / Auto Min Peak Search"
on page 365
Window
Marker
See
"Search Next Peak"
Window
Remote commands
on page 370
857
857
Publicité
