Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Manual operation:
HCOPy:TREPort:ITEM:HEADer:STATe <State>
This command includes or excludes the complete set of measurement information from
the test report.
Parameters:
<State>
Example:
Manual operation:
HCOPy:TREPort:ITEM:LIST? [<ChannelType>]
This command queries the selected information to be included in the test report for a
specific channel type.
Parameters:
<ChannelType>
Example:
Usage:
Table 10-8: Available <ChannelTypes>
<ChannelType>
SAN
HCOPy:TREPort:ITEM:LOGO <FileName>
This command selects a graphic (for example a company logo) that is shown at the top
of each page in the test report.
Use
under which the picture is shown.
Parameters:
<FileName>
Example:
Manuel d'utilisation 1179.5860.09 - 12
See
ON | OFF
*RST:
HCOP:TREP:ITEM:HEAD:STAT ON
Includes the measurement information in the test report.
See
Selects the channel type that you want to query the test report
configuration for.
When you omit the parameter, the command returns the configu-
ration of the currently selected channel.
HCOP:TREP:ITEM:LIST? SAN
Queries the items that are included in the test reports of the
Spectrum application.
Query only
HCOPy:TREPort:ITEM:LOGO:CONTrol
String containing the location and name of the picture.
You can use the following file types: bmp, jpg, png, gif, emf or
wmf format.
HCOP:TREP:ITEM:LOGO 'C:\aPicture.jpg'
Includes a picture at the top of each page of the report.
"Title"
on page 505
ON
"State"
on page 505
Spectrum
on page 950 to select the conditions
Remote commands
Managing settings and results
955
955
Publicité
