Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Note: The remote error list is automatically cleared when the R&S FPL1000 is shut
down.
Example:
Manual operation:
SYSTem:ERRor:EXTended? <MessageType>[, <ChannelName>]
This command queries all system messages, or all messages of a defined type, dis-
played in the status bar for a specific channel setup (application).
Note: This command queries the strings displayed for manual operation. For remote
programs, do not define processing steps depending on these results. Instead, query
the results of the STATus:QUEStionable:EXTended:INFO status register, which
indicates whether messages of a certain type have occurred (see
"STATus:QUEStionable:EXTended:INFO
Parameters:
<MessageType>
<ChannelName>
Return values:
<Messages>
Example:
Example:
Usage:
SYSTem:ERRor:LIST? [<MessType>]
This command queries the error messages that occur during R&S FPL1000 operation.
Query parameters:
<MessType>
Manuel d'utilisation 1179.5860.09 - 12
SYST:ERR:CLE:REM
See
"Display Remote Errors"
See
"Clear Error List"
on page 581
register",
ALL | INFO | WARNing | FATal | ERRor | MESSage
String containing the name of the channel setup.
The parameter is optional. If you omit it, the command works for
the currently active channel setup.
String containing all messages of the selected type for the speci-
fied channel setup. Each message is separated by a comma
and inserted in parentheses. If no messages are available,
empty parentheses are returned.
SYST:ERR:EXT? ALL
Returns all messages for the currently active application, e.g.
"Message 1","Message 2".
SYST:ERR:EXT? FAT,'Spectrum2'
Queries fatal errors in the 'Spectrum2' application. If none have
occurred, the result is: " ".
Query only
SMSG | REMote
SMSG
(default) Queries the system messages which occurred during
manual operation.
Remote commands
Configuring the R&S FPL1000
on page 575
Chapter 9.2.2.8,
on page 565).
984
984
Publicité
