Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
<ri>
<li>
Parameters:
<Level>
Example:
Manual operation:
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP:ABS <Level>
This command defines an absolute limit for the MAX function of the relative limit for a
SEM range.
For more information see
Suffix:
<sb>
<ri>
<li>
Parameters:
<Level>
Example:
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
1..n
Selects the SEM range.
1..n
Power class for which the limit is defined.
Relative limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST:
-50
Default unit: dBc
SENSe:ESPectrum:RANGe:LIMit:RELative:STOP -15
For a detailed example see
measurement",
on page 678.
See
"Rel Limit Start / Stop <n>"
"Relative limit line functions"
1 to 3
1..n
Selects the SEM range.
1..n
Power class for which the limit is defined.
Absolute limit at the stop frequency of a SEM range to be used
in addition to the relative limit if the MAX function is enabled (see
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:
RELative:STOP:FUNCtion
Range:
-400 to 400
*RST:
-13
Default unit: dBm
SENSe:ESPectrum:RANGe:LIMit:RELative:STOP:
ABSolute -15
For a detailed example see
measurement",
on page 678.
See
"Rel Limit Start / Stop <n>"
Remote commands
Chapter 10.6.7.10, "Example: SEM
on page 183
on page 173.
on page 665).
Chapter 10.6.7.10, "Example: SEM
on page 183
670
670
Publicité
