Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Manual operation:
MMEMory:LOAD<n>:TRACe <Trace>, <FileName>
This command imports trace data from the specified window to an ASCII file.
Suffix:
<n>
Parameters:
<Trace>
<FileName>
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command exports trace data from the specified window to an ASCII file.
For details on the file format see
on page 462.
Suffix:
<n>
Parameters:
<Trace>
<FileName>
Example:
Manual operation:
10.8.7.7
Programming example: configuring a spectrogram
This example demonstrates how to configure a spectrogram for a basic frequency
sweep in a remote environment. The spectrogram is displayed in addition to the spec-
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
ALL
Imports several traces at once, overwriting the existing trace
data for any active trace in the result display with the same trace
number. Data from the import file for currently not active traces
is not imported.
The <trace> parameter for the
on page 834 command is ignored.
*RST:
SINGle
See
"Import All Traces/Import to Trace"
See
"Import ASCII File to Trace"
Window
Number of the trace to be stored
(This parameter is ignored for
ALL).
String containing the path and name of the import file.
Chapter 6.13.6, "Reference: ASCII file export
Window
Number of the trace to be stored
(This parameter is ignored if the option "Export all Traces and all
Table Results" is activated in the Export configuration settings,
FORMat:DEXPort:TRACes
see
String containing the path and name of the target file.
MMEM:STOR1:TRAC 1,'C:\TEST.ASC'
Stores trace 1 from window 1 in the file TEST.ASC.
See
"Export Trace to ASCII File"
Remote commands
MMEMory:LOAD<n>:TRACe
on page 460
on page 460
FORMat:DIMPort:TRACes
on page 832).
on page 459
format",
840
840
Publicité
