Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
MMEMory:NAME <FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with HCOPy[:IMMediate<1|2>].
Note that you have to route the printer output to a file.
●
It defines the name and directory of a test report.
Parameters:
<FileName>
Example:
Manual operation:
MMEMory:NETWork:DISConnect <Drive>[, <State>]
This command disconnects a network drive.
Parameters:
<Drive>
<State>
MMEMory:NETWork:MAP <FilePath>, <IP>[, <UserName>, <Password>, <State>]
This command maps a drive to a server or server directory of the network.
Note that you have to allow sharing for a server or folder in Microsoft networks first.
Parameters:
<FilePath>
<IP>
<UserName>
Manuel d'utilisation 1179.5860.09 - 12
String containing the path and name of the target file.
MMEM:NAME 'C:\Data\PRINT1.BMP'
Selects the file name.
See
"Report Path"
on page 501
See
"Save"
on page 510
String containing the drive name.
1 | 0 | ON | OFF
Optional: determines whether disconnection is forced or not
1 | ON
Disconnection is forced.
0 | OFF
Disconnect only if not in use.
*RST:
0
String containing the drive name or path of the directory you
want to map.
String containing the host name of the computer or the IP
address and the share name of the drive.
'<\host name or IP address\share name>'
String containing a user name in the network.
The user name is optional.
Remote commands
Managing settings and results
929
929
Publicité
