Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
CALCulate<n>:LIMit<li>:ESPectrum<sb>:RESTore
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
[SENSe:]ESPectrum<sb>:PRESet:RESTore
[SENSe:]ESPectrum<sb>:PRESet:STORe
CALCulate<n>:LIMit<li>:ESPectrum<sb>:RESTore
This command restores the predefined limit lines for the selected Spectrum Emission
Mask standard.
All modifications made to the predefined limit lines are lost and the factory-set values
are restored.
Suffix:
<n>
<li>
<sb>
Example:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard] <Standard>
This command loads a measurement configuration.
Standard definitions are stored in an xml file. The default directory for SEM standards
is C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\sem_std.
Suffix:
<sb>
Parameters:
<Standard>
Manual operation:
[SENSe:]ESPectrum<sb>:PRESet:RESTore
This command restores the default configurations of predefined SEM standards.
Note that the command will overwrite customized standards that have the same name
as predefined standards.
Suffix:
<sb>
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
....................................................................... 652
........................................................................... 652
.............................................................................. 653
irrelevant
irrelevant
irrelevant
CALC:LIM:ESP:REST
Resets the limit lines for the current Spectrum Emission Mask
standard to the default setting.
1 to 3
Sub block in a Multi-SEM measurement
String containing the file name.
If you have stored the file in a subdirectory of the directory men-
tioned above, you have to include the relative path to the file.
See
"Standard"
on page 186
See
"Load Standard"
on page 191
1 to 3
Sub block in a Multi-SEM measurement
See
"Restore Standard Files"
Remote commands
................................................................ 652
on page 191
658
658
Publicité
