Rohde & Schwarz FPL1000 Manuel D'utilisation page 751

®
R&S FPL1000
Example:
Usage:
LAYout:IDENtify[:WINDow]? <WindowName>
This command queries the index of a particular display window in the active channel
setup.
Note: to query the name of a particular window, use the
IDENtify?
Query parameters:
<WindowName>
Return values:
<WindowIndex>
Example:
Usage:
LAYout:MOVE[:WINDow] <WindowName>, <WindowName>, <Direction>
Setting parameters:
<WindowName>
<WindowName>
<Direction>
Example:
Manuel d'utilisation 1179.5860.09 - 12
LAY:CAT?
Result:
'2',2,'1',1
Two windows are displayed, named '2' (at the top or left), and '1'
(at the bottom or right).
Query only
query.
String containing the name of a window.
Index number of the window.
LAY:IDEN:WIND? '2'
Queries the index of the result display named '2'.
Response:
2
Query only
String containing the name of an existing window that is to be
moved.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows in the active
channel setup, use the
String containing the name of an existing window the selected
window is placed next to or replaces.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows in the active
channel setup, use the
LEFT | RIGHt | ABOVe | BELow | REPLace
Destination the selected window is moved to, relative to the ref-
erence window.
LAY:MOVE '4','1',LEFT
Moves the window named '4' to the left of window 1.
Remote commands
Remote commands for result displays
LAYout:WINDow<n>:
LAYout:CATalog[:WINDow]?
LAYout:CATalog[:WINDow]?
query.
query.
751 751