Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
SYSTem:DISPlay:UPDate <State>
This command turns the display during remote operation on and off.
If on, the R&S FPL1000 updates the diagrams, traces and display fields only.
The best performance is obtained if the display is off during remote control operation.
Parameters:
<State>
Example:
Manual operation:
SYSTem:ERRor:DISPlay <State>
This command the error display during remote operation on and off.
If activated, the R&S FPL1000 displays a message box at the bottom of the screen that
contains the most recent type of error and the command that caused the error.
Parameters:
<State>
Example:
Manual operation:
SYSTem:IDENtify:FACTory
This command resets the query to
Manual operation:
SYSTem:IDENtify[:STRing] <String>
This command defines the response to *IDN?.
Parameters:
<String>
Manual operation:
Manuel d'utilisation 1179.5860.09 - 12
ON | 1
The function is not available and the display is not updated dur-
ing remote operation.
*RST:
0
ON | OFF | 1 | 0
*RST:
0
SYST:DISP:UPD ON
See
"Remote Display Update"
ON | OFF | 1 | 0
*RST:
0
SYST:ERR:DISP ON
See
"Display Remote Errors"
*IDN?
to its default value.
See
"Reset to Factory String"
String containing the description of the instrument.
See
"Identification String"
Remote commands
Configuring the R&S FPL1000
on page 575
on page 575
on page 574
on page 574
980
980
Publicité
