Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Suffix:
<n>
<m>
Parameters:
<State>
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:NHARmonics <NoHarmonics>
This command selects the number of harmonics that the R&S FPL1000 looks for.
Suffix:
<n>
<m>
Parameters:
<NoHarmonics>
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:PRESet
This command initiates a measurement to determine the ideal configuration for the har-
monic distortion measurement.
The method depends on the span.
●
Frequency domain (span > 0)
Frequency and level of the first harmonic are determined and used for the mea-
surement list.
●
Time domain (span = 0)
The level of the first harmonic is determined. The frequency remains unchanged.
Suffix:
<n>
<m>
Manual operation:
10.6.11.3
Performing the measurement
The following commands are required to perform a harmonic distortion measurement:
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
Window
Marker
ON | OFF | 0 | 1
OFF | 0
identical
ON | 1
a multiple
*RST:
1
See
"Harmonic RBW Auto"
Window
Marker
Range:
1 to 26
*RST:
10
See
"Number of Harmonics"
Window
Marker
See
"Adjust Settings"
on page 242
Remote commands
on page 242
on page 242
721
721
Publicité
