Rohde & Schwarz FPL1000 Manuel D'utilisation page 965

®
R&S FPL1000
//Store pdf of printout to file
HCOP:IMM
10.10 Configuring the R&S FPL1000
The remote commands required to set up the R&S FPL1000 are described here.
●
Configuring the reference frequency
●
Calibration and checks
●
Working with transducers
●
Customizing the screen layout
●
Remote commands for language settings
●
Configuring the network and remote control
●
Checking the system configuration
●
Using service functions
10.10.1 Configuring the reference frequency
[SENSe:]ROSCillator:SOURce
[SENSe:]ROSCillator:SOURce <Source>
This command selects the reference oscillator.
If you want to select the external reference, it must be connected to the R&S FPL1000.
Parameters:
<Source>
Example:
10.10.2 Calibration and checks
The following commands control calibration and checks on the R&S FPL1000.
CALibration[:ALL]?
CALibration:RESult?
DIAGnostic:SERVice:INPut:PULSed:CFRequency
DIAGnostic:SERVice:INPut:PULSed:MCFRequency
DIAGnostic:SERVice:INPut:RF[:SPECtrum]
Manuel d'utilisation 1179.5860.09 - 12
.................................................................................................. 959
.............................................................................................. 962
..................................................................................... 967
.............................................................................. 976
................................................................................................. 980
................................................................................................ 959
INTernal
The internal reference is used (10 MHz).
EXTernal
The external reference from the "REF INPUT 10 MHZ" connec-
tor is used; if none is available, an error flag is displayed in the
status bar.
ROSC:SOUR EXT
................................................................................................................... 960
................................................................................................................ 960
............................................................................ 961
Configuring the R&S FPL1000
........................................................................... 959
.................................................................. 972
.............................................................. 972
.................................................................. 961
............................................................... 961
Remote commands
965 965