Rohde & Schwarz FPL1000 Manuel D'utilisation page 584

®
R&S FPL1000
Coupling
Controls the default coupling ratios in the HP emulation mode for:
●
span and resolution bandwidth (Span/RBW)
●
resolution bandwidth and video bandwidth (RBW/VBW)
For FSx, the standard parameter coupling of the instrument is used. As a result, in
most cases a shorter sweep time is used than in case of HP.
This setting is only available if a HP language is selected (see
on page 577).
Remote command:
SYSTem:HPCoupling
Revision String
Defines the response to the REV? query for the revision number.
(HP emulation only, see
Max. 36 characters are allowed.
Remote command:
SYSTem:REVision[:STRing]
Resetting the Factory Revision
Resets the response to the REV? query for the revision number to the factory default
(HP emulation only, see
Remote command:
SYSTem:REVision:FACTory
9.4.4 LAN settings
Access: [SETUP] > "Network + Remote" > "LAN" tab
In a LAN network, the R&S FPL1000 can be accessed via any web browser (e.g. the
Microsoft Internet Explorer) to perform the following tasks:
●
Modifying network configurations
●
Modifying device configurations
●
Monitoring connections from the device to other devices
The "LAN" tab of the "Network + Remote" dialog box provides basic LAN configuration
functions and information for the R&S FPL1000.
Alternatively, you can change the LAN settings using the web browser interface.
For details see
interface",
Only user accounts with administrator rights are able to use LAN configuration and
web browser functionality.
Manuel d'utilisation 1179.5860.09 - 12
on page 983
"Language"
"Language"
on page 976
Chapter 9.5.1.4, "How to configure the LAN using the web browser
on page 586.
Network operation and remote control
Network and remote control settings
on page 577).
on page 984
on page 577).
"Language"
584 584