Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
CALCulate<n>:PMETer<p>:RELative[:MAGNitude] <RefValue>
This command defines the reference value for relative measurements.
Suffix:
<n>
<p>
Parameters:
<RefValue>
Example:
Manual operation:
CALCulate<n>:PMETer<p>:RELative[:MAGNitude]:AUTO ONCE
This command sets the current measurement result as the reference level for relative
measurements.
Suffix:
<n>
<p>
Example:
Usage:
Manual operation:
CALCulate<n>:PMETer<p>:RELative:STATe <State>
This command turns relative power sensor measurements on and off.
Suffix:
<n>
<p>
Parameters:
<State>
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Window
Power sensor index
Range:
-200 dBm to 200 dBm
*RST:
0
Default unit: DBM
CALC:PMET2:REL -30
Sets the reference value for relative measurements to -30 dBm
for power sensor 2.
See
"Reference Value"
Window
Power sensor index
CALC:PMET2:REL:AUTO ONCE
Takes the current measurement value as reference value for rel-
ative measurements for power sensor 2.
Event
See
"Setting the Reference Level from the Measurement Meas -
> Ref"
on page 288
Window
Power sensor index
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Remote commands
on page 288
796
796
Publicité
