Rohde & Schwarz FPL1000 Manuel D'utilisation page 887

®
R&S FPL1000
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:SPAN <Span>
This command defines the bandwidth around the delta marker position.
Suffix:
<n>
<m>
Parameters:
<Span>
Manual operation:
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer[:STATe] <State>
This command turns delta markers for band power measurements on and off.
If neccessary, the command also turns on a reference marker.
Suffix:
<n>
<m>
Parameters:
<State>
Manual operation:
10.8.8.12 N db down marker
The following commands control the n dB down markers.
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor?
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:TIME?
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown <Distance>
This command defines the distance of the n dB down markers to the reference marker.
Manuel d'utilisation 1179.5860.09 - 12
Setting basic spectrum RF measurement parameters
Window
Marker
Frequency. The maximum span depends on the marker position
and R&S FPL1000 model.
*RST: 5% of current span
Default unit: Hz
See "Span" on page 385
Window
Marker
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
See "Band Power Measurement State"
See "Switching All Band Power Measurements Off"
Remote commands
on page 384
.................................................................. 881
........................................... 882
................................................. 883
.................................................... 883
...................................................... 884
...................................................... 884
on page 385
887 887