Publicité
Les langues disponibles
Les langues disponibles
®
R&S
FPL1000
Manual operation:
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch> <Name>
This command defines a name for an alternate channel.
Suffix:
<ch>
Parameters:
<Name>
Manual operation:
[SENSe:]POWer:ACHannel:NAME:CHANnel<ch> <Name>
This command defines a name for a transmission channel.
Suffix:
<ch>
Parameters:
<Name>
Manual operation:
[SENSe:]POWer:ACHannel:SPACing[:ACHannel] <Spacing>
This command defines the distance from transmission channel to adjacent channel.
Parameters:
<Spacing>
Manual operation:
[SENSe:]POWer:ACHannel:SPACing:ALTernate<ch> <Spacing>
This command defines the distance from transmission channel to alternate channels.
If you set the channel spacing for the first alternate channel, the R&S FPL1000 adjusts
the spacing of alternate channels of a lower order, but not the other way round. The
command works hierarchically: to set a distance from the transmission channel to the
2nd and 3rd alternate channel, you have to define a spacing for the 2nd alternate
channel first.
Manuel d'utilisation 1179.5860.09 - 12
Configuring and performing measurements
See
"Channel Names"
1..n
Alternate channel number
String containing the name of the channel
*RST:
ALT<1...11>
See
"Channel Names"
1..n
Tx channel number
String containing the name of the channel
*RST:
TX<1...12>
See
"Channel Names"
Range:
100 Hz to 2000 MHz
*RST:
14 kHz
Default unit: Hz
See
"Channel Spacings"
Remote commands
on page 147
on page 147
on page 147
on page 145
640
640
Publicité
