Rohde & Schwarz FPL1000 Manuel D'utilisation page 600

®
R&S FPL1000
b) Under "File to Upload", select "Browse" to open a file selection dialog box and
c) Select "Upload" to copy the file from the PC to the defined folder on the
9.5.6 How to deactivate the web browser interface
If you want to prevent other users in the LAN from accessing or operating the
R&S FPL1000 via its LAN web browser interface, you must deactivate this function.
Note that after a firmware update the function is automatically active again until you
deactivate it manually.
To deactivate the LAN web browser interface
1.
Select the "Windows" icon in the toolbar to access the operating system.
2. In the "Start" menu, select "Control Panel".
3. Select "System and Security" > "Administrative Tools".
4. From the list on the right, select "Services".
5. From the list of local services, select "R&S TightVNC Server".
6. Set "Startup type" to "Disabled".
7. Select "Stop".
8. Select "Apply".
The next time a user enters the IP address of the instrument in a web browser, an
error message is displayed:
Manuel d'utilisation 1179.5860.09 - 12
select the required file on the PC.
R&S FPL1000.
Network operation and remote control
How to set up a network and remote control
600 600